Tantalum and Tantalum Alloy Rod and Bar
Tantalum and tantalum alloy rods and bars are made of tantalum ingots. It can be used in the chemical industry and oil industry due to its corrosion resistance. Nippon titanium is a trusted supplier of tantalum rod/bar and we can provide customized tantalum products. CDM’s tantalum rod is worked cold from ingot to final diameter. Forging, rolling, swaging, and drawing are used singularly or in combination to reach the desired size.
Tantalum rod and bar are mainly used as high-temperature alloys containing tantalum, tantalum-based heat-resistant and corrosion-resistant alloy additives.
Products | Material | Grade | Process | Standards | Size | |||||
Tantalum Rod/bar | Ta1, Ta2 | Ta R05200 Ta R05240 Ta R05252 Ta R05255 Ta R05400 | Bar billet | ASTM B365 ASTM F560 | Diameter: 3-120mm Length: as per clients’ requirement | |||||
Sintering | ||||||||||
Tantalum Niobium bar | TaNb3, TaNb20, TaNb40 | Semi-finished bar | ||||||||
Forging | ||||||||||
Swaging | ||||||||||
Tantalum Tungsten bar | Ta2.5W, Ta10W | Polished | ||||||||
Ebd products | ||||||||||
Packing |
Specification and Standard for tantalum alloy plate and sheet | ||||||||||
1.Used as a substitute for platinum(Pt). (can lower the cost) | ||||||||||
2.Used in manufacturing super alloys and electron-beam melting. (high-temperature alloys like Ta-W alloys, Ta-Nb alloys, corrosion-resistant alloy additives.) | ||||||||||
3.Used in chemical industry and oil industry (corrosion resistance equipment) |
Specification and Standard for tantalum and alloy rod and bar | |||||||||||
Positive material recognition | Tensile, elongation and reduction of area | Pitting corrosion Test | Visual inspection | ||||||||
Dimensional inspect | Chemical examination | Eddy current examining | X-ray test |
Nippon Titanium Metals Corporation
1-5-8 HommachiDS Bld.7F,
Azuchimachi, Chuo-ku Osaka-shi,
Osaka, 541-0052 JAPAN
E-mail: info@nippontitanium.com
Sales Department
Tel: 81 (6) 6210-4293
Fax: 81 (6) 6210-4294
E-mail: sales@nippontitanium.com